1.The suitable material is PE, PP, PVC
Auto Extrusion Blow Molding Machine(JN-S80L)
♦ Single station
♦ The Max. product volume is 80 liters.
♦ The extrusion material store capacity is 12.8L.
- the screw adopts high potency melt to make sure the material well
- adopt the frequency control of motor system to reduce the power
- adopt horizontal movement frame to improve stability and speed.
- the oil cylinder is in the center of the moldboard, uniform stress
for quality products and increase the life span.
- high stench guild rod controller the mold open and clamp, to
enhance the steadily and high efficiency.
- the extrusion head use spreader or screw type to well mixed the
thickness and easy to change the different color.
- advances design to eliminate the melt material degrade in the
runner, to avoid the perform draw-down and the welding line.
- the precise time control system assured good quality, suitable
weight and reduces production cycle.
- freely to move the extrusion foundation backward and forward to
make the exchange of the mold easy.
- multi-function bottom blowing type for shaped products.
- the mechanical arm can take out the products automaticaly.
|Max. product Volume (L)||80|
|Dry cycle (pc/h)||360|
|Screw diameter (mm)||100|
Screw L/D ratio (L/D)
|Screw motor power (kw)||45~55|
|Screw heating capacity (kw)|
|No. of heating zone (zone)||4~5|
|Output of HDPE (kg/hr)||180~250|
|Oil pump driver power (kw)||37|
|Clamping force (KN)||300~400|
|Mold Stroke (mm)||500~1200|
|Size of Mold (W*H) mm||800*1000|
|Max. Dia Diameter (mm)||420|
|Die Heat Capacity (kw)||9.2|
|Blowing Pressure (Mpa)||0.8|
|Air Volume (M³ /Min)||1.2|
|Cooling Water Pressure (Mpa)||0.3|
|Water Consumption (L/min)||100|
|Weight of Machine (Ton)||16|
|Size of Machine(L*W*H) (m)||5.2*2.45*3.9|
1. Single station,single layer, 100mm screw, 45~55kw screw motor
power, PE / PP etc.
2. Power supply: 380VAC, 50Hz (depending on client's county).
3. One die Head(the picture is in the below);
4. MOOG 100 Points Parison Controller (Optional)
(Type CMachine Component List)
- PLC controller: Germany SIEMENS
- France Schneider low-voltage apparatus
- Domestic test components
- Siemens Beide electrical motor
- Taiwan Delta VFD-B frequency
- USA Vickers hydraulic valve
- Taiwan Airtac air valve(UAS numatic air valve)
- No 1 & No 5. Eelectrical control panel
- Brand: Schneider and OMRON
- No 2. Pneumatic System
- Brand: Schneider
- No 3. Oil Pump/Selector Valve
- Brand: Northman or Vickers
- No 4. Oil Pump/ Selector Valve
- Brand: VICKERS or YUKEN
- No 6. Hydraulic System
- Brand: Taiwan Northman, Japan YUKEN, and America VICKERS
- No 7. Parison Controller
- Brand: MOOG(100 points)